View LQ043T1DG02_5328226.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

avnet embedded. support aro und the b oard ? www.avnet-embedded.eu datasheet sharp LQ043T1DG02 avn et em bedded sp e cific at ion. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 1 of 21 notice this publication is the proprietary of sharp and is co pyrighted, with all rights rese rved. under the copyright laws, no part of this publication may be reproduced or tr ansmitted in any form or by any means, electronic or mechanical for any purpose, in whole or in part, without t he express written permission of sharp. express written permission is also required before any use of th is publication may be made by a third party. the application circuit examples in this publication ar e provided to explain the re presentative applications of sharp's devices and are not intended to guarantee any circuit design or permit any industrial property right or other rights to be executed. sharp takes no responsibility for any problems related to any industrial property right or a third party resulting from the use of sharp's devices, except for those resu lting directly from device manufacturing processes. in the absence of confirmation by device specification sheets, sharp takes no responsibility for any defects that occur in equipment using any of sharp's devices, shown in catalogs, data books, etc. contact sharp in order to obtain the latest device sp ecification sheets before using any sharp's device. sharp reserves the right to make changes in the specif ications, characteristics, data, materials, structures and other contents described herein at any ti me without notice in order to improve design or reliability. contact sharp in order to obtain the latest specificat ion sheets before using any sharp's devic e. manufacturing locations are also subject to change without notice. observe the following points when using any device in this publication. sharp takes no responsibility for damage caused by improper use of the devices. the devices in this publication are designed for use in general electronic equipment designs, such as: personal computers office automation telecommunication equipment test and measurement equipment industrial control personal digital assistant audio visual and multimedia equipment consumer electronics the appropriate design measures should be taken to ensure reliability and safety when sharp's devices are used for equipment such as: transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) traffic signals gas leakage sensor breakers alarm equipment various safety devices etc. sharp's devices shall not be used for equipment that requires extremely high level of reliability, such as: military and space applications nuclear power control equipment medical equipment for life support contact a sharp representative, in advance, when intending to use sharp's devices for any "specific" applications other than those recommended by sharp. contact and consult with a sharp representative if ther e are any questions about the c ontents of this publication. www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 2 of 21 1. applicable scope this specification is applicable to tft-lcd module ?LQ043T1DG02?. 2. general description this module is a color active matrix lcd module incorporating am orphous silicon tft (t hin f ilm t ransistor). it is composed of a color tft-lcd panel, driver ics, input fpc and a back light unit. graphics and texts can be displayed on a 4803272 do ts panel with about 16million colo rs by supplying 24bit data signals(8bitrgb), four timing signals, logic (typ. +3 .3v), analog (typ. +5v) supply voltages for tft-lcd panel driving and supply voltage for back light. 3. mechanical (physical) specifications item specifications unit screen size 10.9 (4.3? type) diagonal cm active area 95.04(h)53.856(v) mm 480(h)272(v) pixel pixel format 1 pixel =r+g+b dots - pixel pitch 0.198(h)0.198(v) mm pixel configuration r,g, b vertical stripes - display mode normally white - unit outline dimensions 105.5(w)67.2(h)3.95(d) mm mass approx. 48.5 g the above-mentioned table indicates module si zes without some projections and fpc. for detailed measurements and toler ances, please refer to fig.1. www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 3 of 21 4. input terminal names and functions 4-1. tft lcd panel driving (reference connector: hirose electric co., ltd. pr oduct no.: fh12a-40s-0.5sh (55) top contact type) the bottom contact type can be selected according to side of mounted connector and terminal side of fpc. terminal no. terminal name function remarks 1 gnd gnd(0v) 2 gnd gnd(0v) 3 vcc +3.3v power source 4 vcc +3.3v power source 5 r0 red data signal (lsb) 6 r1 red data signal 7 r2 red data signal 8 r3 red data signal 9 r4 red data signal 10 r5 red data signal 11 r6 red data signal 12 r7 red data signal (msb) 13 g0 green data signal (lsb) 14 g1 green data signal 15 g2 green data signal 16 g3 green data signal 17 g4 green data signal 18 g5 green data signal 19 g6 green data signal 20 g7 green data signal (msb) 21 b0 blue data signal (lsb) 22 b1 blue data signal 23 b2 blue data signal 24 b3 blue data signal 25 b4 blue data signal 26 b5 blue data signal 27 b6 blue data signal 28 b7 blue data signal (msb) 29 gnd gnd(0v) 30 ck clock signal to sample each date 31 disp display on/off signal 32 hsync horizontal synchronizing signal 33 vsync vertical synchronizing signal 34 nc nc note 1 35 avdd +5v analog power source 36 avdd +5v analog power source 37 nc nc note 1 38 test1 test1 note 2 39 test2 test2 note 3 40 test3 test3 note 3 note 1) they have been open within fpc. note 2) please be sure to set 38 pins (test1) to open. note 3) please be sure to connect 39 pin (test2), 40 pin (test3) with gnd. www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 4 of 21 4-2. backlight 0.5mmp 4pin fpc (reference connector: kyocera elco cor poration product no.: 6298 bottom contact type) the bottom contact type can be selected according to side of mounted connector and terminal side of fpc. terminal no. signal function 1 v led- led power source input terminal (cathode side) 2 nc no connection 3 nc no connection 4 v led+ led power source input terminal (anode side) 5. absolute maximum ratings item symbol conditions rated value unit remarks input voltage v i ta=25c -0.3 vcc+0.3 v note 1 3.3 v power supply voltage vcc ta=25c 0 +4.5 v 5 v power supply voltage avdd ta=25c 0 +6.0 v temperature for storage t stg - -30 +85 c note 2 temperature for operation t opr - -10 +70 c note 3 led input electric current iled ta=25c 35 ma note 4 led electricit y consumption pled ta=25c 123 mw note 4 note 1 ck,r0 r7,g0 g7,b0 b7,hsync,vsync,disp note 2 humidity : 80%rhmax. (ta 40c) maximum bulb temperature under 39c (ta> 40c) see to it that no dew will be condensed. note 3 panel surface temperature prescribes. (reliability is examined at ambient temperature of 50c.) note 4 power consumption of one led (t a=25c) (use 9 pieces led) ambient temperature and the maximum input are fulfilling the following operating conditions. ambient temperature and the maximum input forward current if (ma) ambient temperature ta (c) www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 5 of 21 6. electrical characteristics 6-1. tft lcd panel driving ta = 25c item symbol min. typ. max. unit remarks dc voltage vcc +2.3 +3.3 +3.6 v note 1 +3.3v power supply dc current i cc - 0.5 2 ma note 3 dc voltage avdd +4.8 +5.0 +5.2 v note 1 +5v power supply dc current i avdd - 8 16 ma note 3 v rfvcc - - 100 mvp-p vcc=+3.3v permissive input ripple voltage v rfavdd - - 100 mvp-p avdd=+5.0v input voltage (low) v il - - 0.2 v cc v input voltage (high) v ih 0.8 v cc - - v note 4 input current (low) i ol - - 4.0 a v i =0v note 4 input current (high) i oh - - 4.0 a v i =2.5v note 4 the rush current will flows when power supply is turned on, so please design the power supply circuit referring to note 5 . (the rush current changes according to t he condition of the suppl y voltage value, rising time and so on.) www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 6 of 21 note 1 sequences of supply voltage and signals please do not suppl y avdd before vcc. it discharges and boost up voltage for tft module on the basis of a disp-signal it drives max-10 flames (about 0.2seconds) from change of disp- signals by reasons that it takes time for 9 flames while each processing operation. therefore, the display start is delayed for 10 flames and ten or more frames needs to be voltage maintained at the time of a display end. it is not problem to set up disp=l ,avdd=gnd when vcc voltage is supplied please don't set various signals to hi-z when vcc-voltage is supplied in reason that thos e signals are cmos input. don't change disp signal into the state of h le vel when avdd voltage is in the state of gnd. the on/off timing of led back light is an example. min typ max unit remarks t1_c 0 - 10 ms t1_d 0.5 - 10 ms t 2 50 - - ms t 3 0.5 - - ms note 2 t 4 0 - - ms t 5 0 - - ms dip conditions for supply voltage td Q 10ms . . vcc td gnd 0.3v 4.8v 0.3v 4.8v 0.3v 0.3v t1_c t1_d t2 t3 t4 t5 max.10frame min.10frame usual lcd white mask display white mask display on processing 9 frame off processing 9 frame vcc avdd ck disp lcd display hsync, vsync data signal required domain on/off led b/l timing (example) on off display 2.3v 2.3v note 2 www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 7 of 21 note 2 while ?vsync? is ?low?, don?t change ?disp? signal ?low? to ?high?. note 3 typical current situation: 256-gray-b ar pattern vcc=3.3v avdd=5.0v note 4 ck, r0 r7, g0 g7,b0 b7,hsync,vsync,disp 2x hsync period right before ?vsync? changes from ?low? to?high?. disp vsync hsync disp vsync hsync vsync disp hsync vsync disp hsync vsync disp hsync vsync disp hsync allowed timing prohibited timing ok ok ng ng www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 8 of 21 note 5 an example of rush current measurement measurement conditions ? power supply voltage vcc 3.3v avdd 5.0v ? disp signal off ? on ? other input signals gnd ? measurement system refer to right fig. ? rush current measurement timing refer to following fig. measurement example rising time rising time 0.01ms 0.5ms 2.3v 0.3v 4.8v 0.3v measurement 1 measurement 2 measu r ement 3 y 20ma/div., 2v/div., x 0.003ms/div . y 20ma/div., 2v/div., x 0.08ms/div . measurement 2 y 50ma/div., 5v/div., x 4ms/div. disp vsync peak current about 100ma i avdd measurement 3 icc i avdd vcc avdd vsync disp rising time 0.01ms peak current vcc i cc measurement 1 about 100ma peak current avdd i avdd risin g time about 80ma 0.5ms these rush current won?t flow stationary, these will flow at the timing shown in measurement 3. vcc avdd measurement part icc i avdd 0.1uf 2.2uf 4.7uf lcd module side www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 9 of 21 6-2. back light driving the back light system has nine leds parameter symbol min. typ. max. unit remark rated voltage v bl - 28.8 31.5 v rated current i l - 20 - ma ta=25c 7. timing characteristics of input signals 7-1 timing characteristics parameter symbol min. typ. max. unit remark frequency 1/tc 7.83 9.00 9.26 mhz duty ratio th/t 40 50 60 % cycle t clk 108 111 128 ns high width t chw 43 - - ns clock low width t clw 43 - - ns vsync setup time t vs 25 - - ns hsync setup time t hs 25 - - ns setup time t ds 25 - - ns data hold time t dh 25 - - ns rising/falling time t rf - - 20 ns period th - 525 - clock pulse width thp - 41 - clock horizontal period thd - 480 - clock back porch thb - 2 - clock horizontal synchronizing front porch thf - 2 - clock period tv - 286 - line pulse width tvp - 10 - line vertical period tvd - 272 - line back porch tvb - 2 - line vertical synchronizing front porch tvf - 2 - line www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 10 of 21 tvf=2h (vertical count tvd=272h dh1 dh2 dh3 dh4 non vertical date domain dh271 dh272 non vertical date domain 8 e e 1 2 tvb=2h tvp=10h 8 e e 8 e e 8 e e 8 e e 8 e e horizontal synchronizing signal vertical synchronizing signal (vsync) (hsync) tv=286h vertical line date signal (r0r7,g0g7, b0b7) horizontal synchronizing signals (hsync) clock signal (ck) date signal (r0r7,g0g7, b0b7) c1* c2* d1 d2 d3 tds tdh non horizontal date domain thp=41clk c3* clock count thd=480clk th=525clk 8 e e 8 e e 8 e e 8 e e 8 e e 8 e e 8 e e 8 e e tc non horizontal date domain horizontal date 8 e e d479 d480 th thb=2clk thf=2clk 8 e e 8 e e 7-2 timing details www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 11 of 21 note ? in case of using the slow frequency, the deter ioration of display, flicker etc may occur. ? the timing characteristics are basically fixed as above. 7-3 input data signals and display position on the screen display position of input data (h v) please refer to 4-2 about led side pin arrangement. please refer to 4-1 about pin arrangement. 40 1 1 v led+ v led- 4 d1,dh1 d1,dh2 d1,dh3 d2,dh2 d2,dh1 d3,dh1 d480,dh1 d480, dh272 d1,dh272 r gb www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 12 of 21 8. input signals, basic display colo rs and gray scale of each color date signal r0 r1 r2 r3 r4 r5 r6 r7 g0 g1 g2 g3 g4 g5 g6 g7 b0 b1 b2 b3 b4 b5 b6 b7 colors & gray scale gray scale lsb msb lsb msb lsb msb black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 green 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 c y an 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ma g enta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yello w 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darke r gs2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? bri g hte r gs253 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? gs254 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gray scale of red red gs255 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darke r gs2 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? bri g hte r gs253 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 0 0 0 0 0 0 0 0 ? gs254 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 gray scale of green green gs255 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 darke r gs2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 ? bri g hte r gs253 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 1 ? gs254 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 gray scale of blue blue gs255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0: low level voltage, 1: high level voltage each basic color can be displayed in 256 gray scales from 8 bit data signals. according to the combination of 24 bit data signals, the 16-million-color display can be achieved on the screen. www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 13 of 21 9. optical characteristics module characteristics ta = 25c, vcc = +3.3v, avdd = 5.0v parameter symbol condition min. typ. max. unit remark horizontal 21, 22 - 60 - deg. 11 - 40 - deg. viewing angle range vertical 12 cr>10 - 60 - deg. note1,4 contrast ratio cr optimum viewing angle 100 300 - - note2,4 response rise r - 30 45 ms time decay d =0 - 30 45 ms note3,4 x 0.27 0.32 0.37 - chromaticity of white y =0 0.29 0.34 0.39 - note4 luminance of white x l1 =0 450 600 - cd/m 2 i led =20ma note4 uniformity u =0 70 80 - % note5 the optical characteristic s measurements are operated un der a stable luminescence(i led =20ma) and a dark condition. (refer to following figure) center lcd module photodetector(bm-5a:topcon) measuring method (c) for optical characteristics 400mm field=2 www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 14 of 21 note 3 definition of response time the response time is defined as the following figure and shall be measured by switching the input signal for ?black? and ?white? note 4 this shall be measured at center of the screen. note 1 definitions of viewing angle range note 2 definition of contrast ratio the contrast ratio is defined as the following black pixels all with s) (brightnes luminance white pixels all with s) (brightnes luminance (cr) ratio ontrast c = 90 10 d3 d4 \ d 90 10 \ r rg black black white white photo detector output (relative value) time normal line r d 6 o?clock 90% 10% 90% 10% www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 15 of 21 note 5 definition of uniformity. (%) 100 = brightness maximum brightness minimum uniformity the brightness should be measured on the 9- point as shown in the following figure. 10. mechanical characteristics 10-1) fpc (for lcd panel) characteristics (1) specific connector: fh12a-40s-0.5sh(55) (hirose) (2) bending endurance of the bending slits portion no line of the fpc is broken for t he bending test (bending radius=0.6mm and angle=90) in 30 cycles. 11. handling of modules 11-1 inserting the fpc into its connector and pulling it out. be sure to turn off the power supply and t he signals when inserting or disconnecting the cable. please insert for too much stress not to join fpc in the case of insertion of fpc. 11-2 about handling of fpc the bending radius of the fp c should be more than 1.4mm, and it should be bent evenly. do not dangle the lcd module by holding the fpc, or do not give any stress to it. 11-3 mounting of the module the module should be held on to the plain surface. do not give any warping or twisting stress to the module. please consider that gnd can gro und a modular metal portion etc. so th at static electricity is not charged to a module. 1/6 1/6 www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 16 of 21 11-4 cautions in assembly / handling pre cautions. as the polarizer can be easily scratc hed, be most careful in handling it. work environments in assembly. working under the following environments is desirable: a) implement more than 1m ? conductive treatment (by placi ng a conductive mat or applying conductive paint) on the floor or tiles. b) no dusts come in to the working room. place an adhesive, anti-dust mat at the entrance of the room. c) humidity of 50 70% and temperature of 15 27c are desirable. d) all workers wear conductive shoes, conductive clothes, conduc tive fingerstalls and grounding belts without fail. e) use a blower for electrostatic removal. set it in a direction slightly t ilt downward so that each module can be well subjected to it s wind. set the blower at an optimum distance between the blower and the module. how the remove dust on the polarizer a) blow out dust by the use of an n2 blower with antistatic measures tak en. use of an ionized air gun is recommendable. b) when the panel surface is soil ed, wipe it with soft cloth. in the case of the module?s metal part (shield case ) is stained, wipe it with a piece of dry, soft cloth. if rather difficult, give a br eath on the metal part to clean better. if water dropped, etc. remains stuck on the polarizer for a long time, it is apt to get discolored or cause stains. wipe it immediately. as a glass substrate is used for the tft-lcd p anel, if it is dropped on the floor or hit by something hard, it may be broken or chipped off. since cmos lsi is used in this m odule, take care of static electr icity and take the human earth into consideration when handling. www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 17 of 21 11-5 others regarding storage of lcd modules, avoid stor ing them at direct sunlight-situation. you are requested to store under the following conditions: (environmental conditions of te mperature/humidity for storage) (1) temperature: 0 40c (2) relative humidity : 95% or less ? as average values of environment s (temperature and humidity) fo r storing, use the following control guidelines: summer season: 20 35c, 85% or less winter season: 5 15c, 85% or less ? if stored under the conditions of 40c and 95% rh, cumulative time of storage must be less than 240 hours. if stored at temperatures below the rated values, the inner liquid crystal may freeze, causing cell destruction. at temperatures exc eeding the rated values for stor age, the liquid crystal may become isotropic liquid, making it no longer possible to co me back to its original state in some cases. if the lcd is broken, do not drink liquid crystal in the mouth. if the liquid crystal adheres to a hand or foot or to clothes, immedi ately cleanse it with soap. if a water drop or dust adheres to the polarizer, it is apt to cause deteriorati on. wipe it immediately. be sure to observe other caution items for ordinary electronic parts and components. 12. delivery form 12-1. carton storage conditions 1) carton piling-up: max 8 rows 2) environments temperature: 0 40c humidity: 65% rh or less (at 40c) there should be no dew condens ation even at a low tem perature and high humidity. 3) packing form: refer to 16.lcd module packing carton cartons are weak against damp, and they are apt to be smashed easily due to the compressive pressure applied when piled up. the above environment al conditions of temperature and humidity are set in consideration of reas onable pile-up for storage. 12-2 packing composition name quantity note carton size 1 575360225 (mm) tray 12 material: electrific ation prevention polypropylene (the number of module) 8 unit/tray: 80 unit/carton electrificatio n prevention bag 2 material: electrificati on prevention polyethylene 680mm(length)500mm(depth)50 (thin) carton weight (80 modules): approx. 8.1 kg www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 18 of 21 13. reliability test items no. test item conditions 1 high temperature storage test ta = +85c 240h 2 low temperature storage test ta = -30c 240h 3 high temperature & high humidity operation test ta = +40c ; 95%rh 240h (no condensation) 4 high temperature operation test ta = +70c 240h (the panel temp. must be less than 50c) 5 low temperature operation test ta = -10c 240h 6 vibration test (non- operating) frequency : 10 55hz/vibration width (one side) : 1.5mm sweep time : 1minutes test period : (2 hours for each direction of x,y,z) 7 shock test direction: x, y, z, time : third for each direction. impact value : 100g action time 6ms 8 thermal shock test ta=-25c 80c /10 cycles (30 min) (30min) 9 electro static discharge test 200v 200pf(0 ? ) to terminals(contact) (1 time for each terminals) 8kv ? 150pf(330 ? ) to housing bezel or panel (contact) 15kv ? 150pf(330 ? ) to housing bezel or panel (in air) 10 fpc bending test bending 30 times by bending radius r0.6mm and angle=90(lcd fpc, b/l fpc) note ta = ambient temperature check items test no.1 9 in the standard condition, there shall be no practical problems that may affect the display function. result evaluation criteria under the display quality test conditions with normal operation state, t hese shall be no change which may affect practi cal display function. www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 19 of 21 14. display grade the standard regarding the grade of color lcd disp laying modules should be based on the delivery inspection standard. 15. lot no. marking the lot no. will be indicated on individual labels. the location is as shown lot numbering and location ar e specified as follows. LQ043T1DG02 06 j 000001 w ? model number LQ043T1DG02 product year (lower 2 digits) 06:2006, 07:2007 product month a: january, b: february, c: march ???????? l: december serial number 000001 999999 factory code q, l, etc. indication label LQ043T1DG02 06j000001 l www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 20 of 21 16. lcd module packing carton 17. others 1 disassembling the module can cause permanent damage and you should be strictly avoided. 2 please be careful that you don?t keep the screen di splayed fixed pattern image for a long time, since retention may occur. 3 if you pressed down a liquid crystal display screen wi th your finger and so on, the alignment disorder of liquid crystal will occur. and t hen it will become display fault. therefore, be careful not to touch the screen di rectly, and to consider not stressing to it. 4 if any problem arises regarding t he items mentioned in this specificat ion sheet or otherwise, it should be discussed and settled mutually in a good faith for remedy and/or improvement. www.datasheet.co.kr datasheet pdf - http://www..net/
lcy-w-06901 page 21 of 21 18. outline dimension fig.1 www.datasheet.co.kr datasheet pdf - http://www..net/
avn et em bedded offic es. loc al avn et em bedded bu s in esses : 03/2010 www.avnet-embedded.eu all trademarks and logos are the property of their respective owners. this document provides a brief overview only and is not intended to be complete or binding offer. product information, including information related to a products specifications, uses or conformance with legal or other requirements, is obtained by avnet from its suppliers or other sources deemed reliable and is provided by avnet on an ?as is basis. avnet makes no representation as to the accuracy or completeness of the product information and avnet disclaims all representations, warranties and liabilities under any theory with respect to the product information, including any implied warranties of merchantability, fitness for a particular purpose, title and/or non- refringement. all product information is subject to change without notice. d e nm a rk trident avnet nortec a/s banemarksvej 50b, 1 2605 broendby phone: +45 3678 6250 fax: +45 3678 6255 trident-denmark @ avnet-embedded.eu f in la n d trident avnet nortec oy tiilenpolttajankuja 3 a b 1720 vantaa phone: +358 207 499260 fax: +358 942 597446 trident-finland @ avnet-embedded.eu f r a nce axess technology avnet emg france sa immeuble 154, parc chene 2 5, alle du general benoist 69000 bron phone: +33 4 72 81 02 30 fax: +33 4 72 81 02 34 axess-bron @ avnet-embedded.eu axess technology avnet emg france sa 4, rue de la couture batiment milan, bp 20209 94518 rungis cedex phone: +33 1 49 78 88 88 fax: +33 1 49 78 88 89 axess-rungis @ avnet-embedded.eu axess technology avnet emg france sa za la hallerais le semiramis 2, alle du communel 35770 vern sur seiche phone: +33 2 99 77 37 02 fax: +33 2 99 77 33 38 axess-rennes @ avnet-embedded.eu ge rm a n y (a u st ri a, c ze c h r e pu bl ic , h un ga r y, po la n d, sw i tze r la n d) avnet embedded avnet emg gmbh gruber stra?e 60c 85586 poing phone: +49 8121 775 500 fax: +49 8121 775 550 poing @ avnet-embedded.eu avnet embedded avnet emg gmbh l?tscher weg 66 41334 nettetal phone: +49 8121 775 500 fax: +49 8121 775 550 nettetal @ avnet-embedded.eu italy avnet embedded avnet emg italy srl via manzoni, 44 20095 cusano milanino phone: +39 02 66092 1 fax: +39 02 66092 498 milano @ avnet-embedded.eu n ethe r la n ds (belg ium , l u xe m b our g) avnet embedded avnet b.v. takkebijsters 2 4802 bl breda phone: +31 76 5722400 fax: +31 76 5722404 benelux @ avnet-embedded.eu sp a in avnet embedded avnet iberia sa c/chile, 10 - edificio madrid 92 28290 las matas (madrid) phone: +34 91 372 7142 fax: +34 91 636 9788 madrid @ avnet-embedded.eu swede n ( nor way) trident avnet nortec ab esplanaden 3 d 172 67 sundbyberg phone: +46 8 564 725 50 fax: +46 8 760 01 10 trident-sweden @ avnet-embedded.eu uni ted kin gd om ( ir ela n d) tdc avnet emg ltd. pilgrims court, 15/17 west street reigate, surrey, rh2 9bl phone: +44 1737 227888 fax: +44 1737 243872 tdc @ avnet-embedded.eu trident avnet emg ltd. pilgrims court, 15/17 west street reigate, surrey, rh2 9bl phone: +44 1737 227800 fax: +44 1737 244698 trident-uk @ avnet-embedded.eu www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LQ043T1DG02

	To Download LQ043T1DG02 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .